China lost foam casting Manufacturers Factory Suppliers
-
Large Al Alloy CastingDimension: 2280×1610×1100mm. Alloy: ZL102. Quality: able to work at 150℃, no leak under 0.5Mpa pressure.. Casting Method: Low pressure casting.Add to Inquiry
-
Airplane DoorDimension: 650×350×100mm. Casting section thickness: 2mm. Alloy: D357. Quality: Internal quality conforms to class I of AMS-21180 by X-ray inspection..Add to Inquiry
-
Al Alloy CastingOuter dimension: ∅5200mm*1100. Weight: 5100 kg. Alloy: ZL114A. Casting method: gravity casting.Add to Inquiry
-
Alluminum Alloy CastingDimension: 956×613×274mm. Alloy: ZL401A. Qualification: Mechanical properties as cast reach σb≥241MPa, δ≥1.5%.. Dimensional precision conforms to CT8 of HBG03-86. Casting Method: Low pressure casting.Add to Inquiry
-
Low Pressure Al Alloy CastingDimension: 2280×1610×1100mm. Alloy: ZL102. Quality: able to work at 150℃, no leak under 0.5Mpa pressure.. Casting Method: Low pressure casting.Add to Inquiry
-
Al Alloy Upper CasingWeight:54 kg. Alloy:ZAlSi7Mg0.3. Casting method:Low pressure casting. Mechanical properties: Rm≥ 300 MPa, Rp0.2≥240 MPa, A≥ 3%. Dimensional precision: Class CT.Add to Inquiry
-
Al Alloy RingOuter dimension: φ2780×300 mm. Weight: 1800 kg. Alloy: ZL114A. Casting method: Gravity casting . Dimensional tolerance: Class CT.Add to Inquiry
-
High Strength Al Alloy CastingDimension: 956×613×274mm. Alloy: ZL401A. Qualification: Mechanical properties as cast reach σb≥241MPa, δ≥1.5%.. Dimensional precision conforms to CT8 of HBG03-86.Add to Inquiry
-
Upper Casing Aluminum Alloy CastingWeight: 54 kg. Alloy: ZAlSi7Mg0.3. Casting method: Low pressure casting. Mechanical properties: Rm≥ 300 MPa, Rp0.2≥240 MPa, A≥ 3%. Dimensional precision: Class CT.Add to Inquiry
-
Al Alloy CastingsOuter dimension: φ2780×300 mm. Weight: 1800 kg. Alloy: ZL114A. Casting method: Gravity casting. Dimensional tolerance: Class CT.Add to Inquiry
-
Ti Alloy ValveThis is a titanium alloy valve cast for a ship building company. The outer dimension of the casting is 910 mm× 255 mm× 255 mm, and the wall thickness of the valve is 6mm.Add to Inquiry
-
Large Ti Alloy CastingThe turbine impeller is made from Ti-6Al-4V titanium alloy. Ti-6Al-4V titanium alloy boasts outstanding comprehensive properties and Ti-6Al-4V parts meet the requirements to be used in harshAdd to Inquiry
The lost foam casting process starts with a foam pattern of the desired endproduct made out of polystyrene beads. The foam pattern is coated with a thin refractory film and placed into dry, unbonded...
Lost foam casting is best suited for intricate designs found in automotive, marine, agricultural, military, and heavy truck applications. It is also a perfect solution for mass-produced pieces...
Lost foam casting (also known as solid casting) is to bond and combine paraffin or foam models similar in size and shape to castings into model clusters, brush refractory coatings and dry...
May 13, 2020 · Lost-foam casting is a casting process in which polystyrene pellets and molten metal is injected into a mold cavity. The molten metal causes the pellets to evaporate. Once...
In lost foam casting, the metal is replacing a styrofoam model, by evaporating the styrofoam and taking its place. Therefore, you will have to make a model, of...
Aug 20, 2020 · Lost foam casting is a type of evaporative pattern casting. This method is quite similar to investment casting which uses wax instead of foam...
- Tel: +86-024-25872276
- Fax: +86-024-25872276
- Email: srif@chinasrif.com
- Add: 17 South Yunfeng Street, Tiexi District, Shenyang P.R. China
















