Magnesium Alloy Casting

Your Professional Magnesium Alloy Casting Supplier

 

Our goal is to become your true partner in the field of aluminum alloy casting in China. SRIF is engaged in the R&D, promotion and production of new foundry materials, processes, techniques and equipment. The factory has accumulated rich manufacturing experience. Our company is committed to applying advanced manufacturing technology and strict quality control standards to every product. The price is competitive and the product is quality-assured, which is a good choice for your long-term cooperation.

 

Why Choose Us

Product Application
SRIF specializes in the production of special steel castings, electro-slag remelting castings, aluminum alloy castings and so on. Our high-quality castings are widely applied in the development of airspace and aerospace equipment, and construction of hydraulic power stations at home and abroad. We boast a complete range of quality management systems.


Our Team
SRIF have are 519 employees at SRIF including over 200 technical staffers, 144 researchers and senior engineers, 124 doctors and masters, together with a number of foundry academic leaders.


Our Service
The company has a professional sales team to provide you with high-quality pre-sales consulting services. During the order production process, customers can communicate with us at any time to understand the production progress. At the same time, we provide high-quality after-sales service to meet the different needs of customers.

 

  • Mg Alloy Casting
    Mg Alloy Casting

    Dimension: Φ700×500mm. Alloy: ZM5. Quality: Internal quality conforms to class Ⅱ of HB965-84 by
    Add to Inquiry
  • Magnesium Alloy Casting
    Magnesium Alloy Casting

    Dimension: Φ700×500mm. Alloy: ZM5. Quality: Internal quality conforms to class Ⅱ of HB965-84 by
    Add to Inquiry
Contact Us
  • Tel: +86-024-25872276
  • Fax: +86-024-25872276
  • Email: srif@chinasrif.com
  • Add: 17 South Yunfeng Street, Tiexi District, Shenyang P.R. China
Advantages of Magnesium Alloy Casting

Lightweight: With a density of 1.7g/cm3, magnesium is the lightest structural metal available. Its alloys are therefore ideal for projects where weight is a key concern, giving a weight advantage over aluminium of 33%, and as much as 50% over titanium.


Strong: Magnesium naturally provides good levels of stiffness due to its hexagonal, close-packed, crystal structure. Cast magnesium alloys have tensile strengths up to 280 MPa and yield up to 160 MPa.


Resistant To Unwanted Mechanical Vibrations: Magnesium has the highest known damping capacity of any structural metal, capable of withstanding 10x more than aluminium, titanium, or steel. It is also flexible, making it easy to machine and cast and meaning it can be injection moulded.


Widely Recyclable: Posing no toxicity hazards, magnesium alloys are helpful for enhancing any project’s post-life green credentials.

 

Application of Magnesium Alloy Casting
 

Automotive industry

 

Magnesium die casting is widely used in the automotive industry for parts where weight reduction is crucial without compromising strength. Common components include instrument panels, transmission cases, steering columns, and seat frames.

Aerospace applications

 

In the aerospace sector, magnesium die-cast parts provide an excellent balance of weight and strength. They’re often used in non-structural areas and, in some cases, for critical components that demand both rigidity and minimal weight.

Electronics and consumer goods

The electronics industry benefits from magnesium’s lightweight and emi/rfi shielding properties, making it ideal for protective housings in devices like laptops, cameras, and smartphones.

Power tools

 

For power tools used in construction and heavy-duty environments, magnesium die casting offers the perfect combination of durability and lightness. Tools with magnesium components are easier to handle over long periods, reducing operator fatigue while withstanding the rigors of job sites.

 

Specifications for Magnesium Alloy Casting

 

 

Dimension

Φ700×500mm/Custom

Quality

Internal quality conforms to class Ⅱ of HB965-84 by X-ray inspection

Casting Method

Low pressure casting

Alloy

ZM5

 

Mg Alloy Casting
Precautions for Use Magnesium Alloy Casting

During the machining of magnesium alloys, the resulting chips and fine powders are in danger of burning or exploding. The chip size generated in the initial processing stage is large. Due to the high thermal conductivity of magnesium, the generated frictional heat can be quickly dissipated, so it is difficult to reach the ignition temperature, and fewer accidents occur at this stage. But in the finishing stage, because the fine chips and fine powder produced have a large specific surface area, it is easy to reach the ignition temperature and cause combustion or explosion accidents.

In the processing of magnesium alloys, the factors that cause the chips to heat up to the flash point or burn are as follows. The relationship between processing speed and cutting rate.

Under any given set of conditions, there is a range of processing speed and feed rate that may cause combustion. As the feed rate increases, the chip thickness increases, making it less likely to reach the ignition temperature. As long as the processing speed is low enough, chips of any size cannot be ignited. If the processing speed is high enough, because the contact time between the chips and the tool is very short, it is impossible to heat chips of any size to the ignition temperature.

 

Surface Treatment of Magnesium Alloy Casting
 

Chemical Transition: The chemical conversion film of magnesium can be classified according to the solution, including the dichromate system, permanganate system, phosphate system, kmno4 system, rare earth element system, stannate system, etc.

 

Anodic Oxidation: Anodic oxidation has base coatings with better wear and corrosion resistance than the chemical transition and also has good bonding force, electric insulation, and thermal shock resistance, so it is one of the commonly used magnesium alloy surface treatment technologies.

 

Metal Coating: Magnesium and magnesium alloy are metals that are hard to plate, which are due to: The magnesium alloy surface is more likely to form magnesium oxide, which is hard to clean, affecting the bonding force of the coating adhesion. The electrochemical properties of magnesium are high, all acid bath will lead to the quick erode of the magnesium base, or the coating is loosely bonded after replacement, or the substitution reaction with other metal ions is strong.

 

Other Service of Magnesium Alloy Casting

 

 

Packing

Cardboard packaging+reinforced cardboard packaging placed on a pallet

Shipping

Air, Land, Sea

Payment Terms

L/C, T/T, Western Union, Paypal, Money Gram

Lead Time

30-45 Days After Payment

 

 

FAQ

 

Q: Why is magnesium preferred for die casting in the automotive and aerospace industries?

A: Magnesium is extremely lightweight yet strong, making it ideal for applications where weight reduction is crucial. It provides a high strength-to-weight ratio, which is beneficial for improving fuel efficiency in cars and ease of handling in aerospace components.

Q: What are the main advantages of magnesium over aluminum in die casting?

A: Magnesium is about 33% lighter than aluminum, making it better for weight-sensitive applications. It also has faster cooling times, which shortens cycle times and boosts productivity.

Q: What are the common applications of magnesium die cast components?

A: Magnesium die cast parts are widely used in automotive components (like seat frames and instrument panels), aerospace parts, electronic device housings, and power tool casings. Its durability, lightweight nature, and EMI/RFI shielding make it a versatile choice across industries.

Q: How does the recyclability of magnesium benefit manufacturers?

A: Magnesium is fully recyclable, which helps manufacturers reduce waste and lower environmental impact. This quality is especially valuable for companies focused on sustainable production methods, as recycled magnesium can be reused without compromising quality.

Q: What advantage of magnesium is retained in magnesium alloy castings?

A: Magnesium alloy castings retain the key advantage of magnesium, which is its light weight. This means products made from these alloys are incredibly lightweight yet maintain strong structural integrity.

Q: Does magnesium alloy casting rust?

A: Magnesium alloy castings do not rust. However, they can corrode when exposed to certain conditions, including water or high humidity. This corrosion, unlike rust, doesn't turn the metal reddish-brown but instead can cause it to appear dull or white.

Q: How strong is a magnesium alloy casting?

A: Magnesium alloy castings have a high strength-to-weight ratio, typically measuring with a tensile strength between 280 and 440 MPa, which makes them considerably strong relative to their lightweight nature.

Q: Is magnesium alloy casting good for the environment?

A: Magnesium is highly recyclable and therefore requires only 5-10 percent of the energy necessary for the manufacture of the primary material.

Q: Why is magnesium alloy casting used in cars?

A: Magnesium alloy castings can also help reduce noise and vibrations compared to typical metals, along with increasing stiffness. Since the weight loss in dynamic structures is several times more important than static.

As one of the most professional magnesium alloy casting manufacturers and suppliers in China, we're featured by premium investment castings with competitive price. Please rest assured to buy high quality customized magnesium alloy casting from our factory. Contact us for quotation.

Mg Alloy Casting

(0/10)

clearall